2012-03-29 Manual Q-8V100 and S-25A30 Rev. 0.1
preliminary
22
6.5.2. Restoring factory default defect pixel list
The factory default defect list can be restored by:
Command Syntax:
DPFD
6.5.3. Defect pixel test mode
Defect pixels can be visualized with a test mode.
Command Syntax:
DPTx
DPT?
x
Test mode
0
Disable test mode
1
Show defect pixels as white in video
2
Show defect pixels as black in video
3
Show defect pixels as white in black image
6.6. Image data formatting
6.6.1. Black level and offset
In
monochrome
cameras, the black level is changed by:
Command Syntax:
BLx
BL?
Here x is the black level from 0 to 1023 (defined in 10 bits).
In
color
cameras, instead of the black level the offset is configurable:
Command Syntax:
OFSx
OFS?
Here x is the offset from 0 to 1023 (defined in 10 bits).
The difference between black level and offset is that the former scales along when gain is
applied whereas the latter does not.
6.6.2. Digital fine gain
Command Syntax:
GAx
GA?
Here x is the gain in steps of 0.01x, ranging from 100 to 400.
