ADIATEK diamond 100 AC, Использование и обслуживание

Страница: 3 / 19

3
INTRODUCTORY COMMENT
Thank you for choosing our machine. This floor cleaning machine is made for the industrial and civil cleaning and is able to clean any type of floor.
During its forward movement, the combined action of the brushes and the detergent solution removes the dirt which is the aspirated through the
rear suction assembly, giving a perfectly dry surface.
The machine must be used only for such purpose. It gives the best performance if it is used correctly and maintained in perfect efficiency. We
therefore ask you to read this instruction booklet carefully whenever difficulties arise in the course of the machine’s use. In case of need, we ask you
to contact our service department for all advice and servicing as may prove necessary.
SOMMARIO
INTRODUCTORY COMMENT 3
LEGEND PANEL OF CONTROLS 4
LEGEND MACHINE 4
MACHINE SYMBOLOGY 5
HANDBOOK SYMBOLOGY 5
OPTIONAL EQUIPMENTS 6
GENERAL RULES OF SAFETY 6
Transfer 6
Storage and disposal 6
Correct use 6
Maintenance 6
GENERAL RULES OF THE BATTERIES 6
TECHNICAL DESCRIPTION 7
BEFORE USE 8
Handling of the packed machine 8
Unpacking the machine 8
Access to the battery compartment 8
Battery installation and setting of the battery type 8
Assembling of the rollbar 8
Battery charger 8
Charging the batteries 8
Connecting the batt. connectors and switching on of the machine 9
Battery charge level 9
Hourmeter 9
Squeegee assembly 9
Adjusting the squeegee 10
Assembling the splashguards 10
Brushes assembly 10
FLOOR CLEANING 10
Recovery tank 10
Detergent solution tank 11
STARTING OF THE MACHINE 12
Forward and backward movement 12
Horn 12
Working brake 12
Emergency-parking brake 12
Automatic squeegee lifting when going backwards 13
Working in automatic mode 13
Working in manual mode 13
Working adjustments 14
Flow adjustment of the detergent solution 14
Brushes pressure adjustment 14
Electric protection 14
Overflow device 14
Selecting and working on 3S “solution saving system” mode 14
STOP OF THE MACHINE AFTER CLEANING OPERATION 14
DAILY MAINTENANCE 15
Recovery tank emptying and cleaning 15
Suction filter cleaning 15
Brushes cleaning 15
Disassembling the brushes 15
Automatic brushes unlocking (version 130) 15
Squeegee cleaning 16
WEEKLY MAINTENANCE 16
Rear squeegee rubber check 16
Squeegee hose cleaning 16
Cleaning of the solution tank and of the outer filter 16
TWO-MONTHLY MAINTENANCE 16
Front squeegee rubber check 16
SIX-MONTHLY MAINTENANCE 16
Splash guard rubber check 16
TROUBLESHOOTING GUIDE 17
The suction motor does not work 17
The brushes motor does not work 17
The traction motor does not work 17
Water does not come down onto the brushes or is insufficient 17
The machine does not clean properly 18
The squeegee does not dry perfectly 18
Excessive foam production 18
PROGRAMMED MAINTENANCE 18
Ordinary periodical maintenance chart 18
SEr1 warning 18