ADIATEK baby, Использование и обслуживание

Страница: 14 / 24

14
9. During the first few meters check that the
solution flow is appropriate. The flow
adjuster of the solution is already adjusted
at the factory to satisfy the cleaning of
most floors. If it is necessary to adjust the
quantity of solution onto the floor, adjust
the lever of the flow adjuster (11).
When moving the machine backwards, make sure
that the squeegee is lifted.
HANDLE BAR ADJUSTMENT
When approaching obstacles or near walls, it is
possible to simplify the handling of the machine
by adjusting the handle bar more vertically with
respect to the machine.
To rotate the handle bar:
1. Lift the release lever (8) present near the
handle bar.
2. Rotate the handle bar into the new working
position keeping the release lever (8) pulled.
3. Release the lever (8) to lock the handle bar
in the desired position.
Once the obstacle has been passed and the
manoeuvre completed repeat the operation to
return to the previous working position.
This operation is possible also with the machine
in motion maintaining pressed contemporarily
the handle bar levers (7).
OVERFILL PROTECTION
In order to avoid serious damages to the suction
motor, the machine is equipped with a float that
intervenes when the recovery tank is full, closing
the suction hose and stopping the suction.
When this happens, it is necessary to empty the
recovery tank.
1. Switch off the machine pressing the on/off
switch.
2. Take off the suction filter cover (17) after
turning the blocking levers (B).
3. Take off the squeegee hose from its seat (A).
4. Lift and remove the recovery tank (16)
holding it from the provided handles, one
on the front and one on the rear of the
tank.
5. Empty the recovery tank into appropriate
containers, according to the standard norms
for the liquid disposal.
6. Reassemble everything.