35
5-10-5 Code Lockout
If an individual code is stored in P1, P2 or P3, reception is enabled when
the codes match, even if one local station communicates with another.
To use memories P1 to P3 for transmission only, lock out the memories.
When you are communicating with two or more groups having the same
frequency, lock out the group code with which stand by is temporarily
stopped.
●
Paging memory lockout
1. Enter the code setting mode and display the number (except
memory 0 and A) to be locked out using the tuning control.
2. Press the MR/M key.
SKP mark lights and the memory is locked out.
3. To cancel, repeat step 1 and 2.
4. You can rotate the tuning control or press the microphone UP/DN
switches to select the desired DTMF code position.
5-11 DTMF CODE DECODING FUNCTION
The DTMF Code Decoding Function is available when the optional
DTMF UNIT (DTF147) is installed.
The Decoding Function is useful to display the receiving DTMF signal
on the LCD with 16 Digits Maximum.
5-11-1 Setting the CODE decoding mode
1. Press the DTMF key to return to normal mode.(turn off the PAG,
C.SQ)
2. Press the F key . The F indicator will light.
3. Press the DTMF key within 10 seconds. It will enter into the DTMF
code decoding mode.
The left 2 small digits represents the position no. of the first decoded
DTMF code displayed on the right of LCD.
The right 4 big digits represents the lasted decoded DTMF codes.
position No. is 13
position No. is 1
