Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EnOcean / BACnet Slave
Document code: MN67C56_ENG Revision 1.000 Page 19 of 30
If selected “BACnet MS/TP”, the means of the fields for “BACnet” are:
In the field “
Baudrate
” the data rate of the BACnet line is defined;
In the field “
Parity
” the parity of the line is defined;
In the field “
BACnet Device Name
” the name to give to the BACnet node is
defined;
In the field “
MAC Address
” the MAC of BACnet node (from 0 to 254) is defined;
The field “
Max Master
” specifies the highest allowable address for master nodes.
The value shall be less than or equal to 127;
The field “
Max Info Frames
” specifies the maximum number of information frames
the node may send before it must pass the token;
In the field “
Device Instance
” the of the BACnet MS/TP side of the converter is
defined;
In the field “
Network
” the BACnet MS/TP network number is defined;
If the field “
BACnet description up to 32 chars
” is checked, the description of
the BACnet objects can be up to 32 chars.
The means of the fields for the “Ethernet Update” section are:
In the fields “
IP ADDRESS
” the IP address of the converter is defined;
In the fields “
SUBNET
Mask
” the SubNet Mask of the converter is defined;
In the fields “
GATEWAY
” the default gateway of the network is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature is
used for going out of the net.
Figure 3b: “Set Communication” window
