Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
DALI / MQTT
Document code: MN67941_ENG Revision 1.000 Page 30 of 40
NETWORK SETTING:
By pressing the
button in the Network view, it is possible
to scan the full DALI network and find all the DALI devices,
the groups set and the scenes configured.
By selecting the single DALI devices found, the single
groups, the single scene or the entire DALI network, it is
possible to manage and test the functioning of the network.
D
EVICES
:
The means of the fields for “DEVICE INFO” are:
In the field “
Device Type
” the type of DALI device
is printed;
In the field “
Software version
” the software
version of the DALI device is printed;
In the fields “
Power Range
” Min value, Actual
value, Max value, System Fail value, Power On
value, Fade Time and Fade Rate of the DALI device
is defined. It is possible to read the actual value and
set a new value;
In the fields “
DEVICE STATUS
” the actual status of
the DALI device is printed;
By clicking on “
SET
” buttons, it is possible to set the
new parameters of the corresponding fields. By
clicking “
LOAD VALUES
” it is possible to read the
actual values set;
In the field “
SET NEW ADDRESS
” it is possible to
program a new ID to the DALI node;
In the field “
REMOVE ADDRESS
” it is possible to delete the ID from the DALI node.
Figure 11: “Device settings” window
