Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
Modbus TCP Master / KNX
Document code: MN67814_ENG Revision 1.003 Pagina 21 di 27
In the field “
Max Error
” is the number of errors continues that the gateway waits before suspending the poll until the next reboot. If
is set to zero this function is disabled;
In the field “
Position
” insert the address of the internal array where read the information;
In the field “
Start Bit
” insert the start bit of the first byte of the field “Position” where start to read the data to write. Valid only for
the “Coil Status”;
If the field “
Swap
” is checked, the data of the Modbus registers are swapped;
In the field “
Mnemonic
” the description for the request is defined.
Note:
If you want that the converter sends the data only “On change” the “Poll Time” must be at 0.
Note:
If the field “On change” is checked and the “Poll Time” is different from 0, the converter sends the Write request cyclically and also
when the data is changed.
