ADF Web HD67814-KNX-B2, Руководство пользователя

Страница: 16 / 27

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual Modbus TCP Master / KNX
Document code: MN67814_ENG Revision 1.003 Pagina 16 di 27
KNX ACCESS:
By pressing the “
KNX Access ” button from the main window for SW67814 (Fig. 2) the “KNX Access” window appears (Fig. 4).
The means of the fields are:
If the field “ Enable ” is checked, the KNX message is enabled;
In the field “ Source Address ” the Source Address to assign to the KNX message is defined;
In the field “ Dest/Group the Group address (2 level structure, 3 level structure or free address structure) or the device address is
defined. In case of Group address, the levels must be separated by ‘/’, in case of Device address, the parts of the address must be
separated by ‘.’;
In the field “ APCI ” the APCI of the KNX message is defined. You can choose between the following:
o
Read: it is used to send a reading request to a KNX device;
o
Write: it is used to send a writing request to a KNX device;
o
Specific value (edited manually).
Figure 4: “KNX Access” window