Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
BACnet Master / KNX
Document code: MN67801_ENG Revision 1.100 Pagina 13 di 31
ETHERNET:
The Ethernet port is used for the BACnet/IP communication (HD67801-KNX-BIP-B2) and for programming the device.
The Ethernet connection must be made using Connector2/3 of HD67801-KNX-xxx-B2 with at least a Category 5E cable. The maximum
length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To
connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC is recommended the use of a
cross cable.
