Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
EtherNet/IP / CANopen - Converter
Document code: MN67429_ENG Revision 1.001 Page 7 of 31
Page 7 of 31
CHARACTERISTICS:
The “
HD67429
” series are rugged devices used to interface CANopen devices with EtherNet/IP network.
With its particular enclosure, equipped with four fixing lugs, makes available the mounting of the device in any plane surface (horizontal,
vertical, oblique).
It is possible to have the device varnished or totally resined and also in both cases with “Mini-Fit®” connectors or “AMP SuperSeal 1.5”
connectors. If is resined, the enclosure, like the “AMP SuperSeal 1.5" connectors, is waterproof (IP63).
All the four series have these characteristics:
Triple 4kV isolation between Power Supply / EtherNet/IP / CANopen;
Varnished / Resined (optionally);
Wide power supply input range: 8…26V AC | 10…40V DC;
Mini-Fit® / AMP SuperSeal 1.5 connectors;
Metal enclosure with fixing lugs;
Possibility to use Metal hose clamps for fixing it without using lugs;
Microprocessor for data control;
Wide temperature range: -40°C / 105°C (-40°F / 221°F).
CONFIGURATION:
You need Compositor SW67429 software on your PC in order to perform the following:
Define the parameter of Ethernet/IP line;
Define the parameter of CANopen line;
Determinate which Ethernet/IP byte transfer in CANopen and vice versa;
Define SDO Server informations;
Define SDO Client informations;
Define PDO informations (RPDO/TPDO);
Update the device.
