Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
Ethernet to RS232 / RS485
Document code: MN67038-2_ENG Revision 1.400 Page 17 of 25
UPDATE VIA SERIAL:
Section “Update Via Serial” (Fig. 11):
In order to load the parameters or update the firmware in the gateway,
follow these instructions:
Turn OFF the device;
Connect the Null Modem cable from your PC to the gateway;
Insert the Boot Jumper (For more info see the “Connection scheme” of
the Converter);
Turn ON the device;
Check the “BOOT Led”. It must blink quickly (more info see the
“Connection scheme” of the Converter);
Select the COM port and press the “Connect” button;
Press the “Next” button;
Select the operations you want to do. You can select only “Firmware”,
only “Project” or both of them;
Press the “Execute update firmware” button to start the upload;
When all the operations are “OK” turn OFF the device;
Disconnect the Boot Jumper;
Turn ON the device.
At this point the configuration/firmware on the device is correctly updated.
Figure 13: “Update Via Serial” windows
