Adey MagnaClean CMX, Установка и обслуживание

Страница: 10 / 24

10
#
Parameter Description
Default Range
8
Temperature
Alarm Enable
Enables/disables temperature alarm
Yes Yes/No
9
Low Temperature
Alarm Low temperature alarm value
4°C
0-120°C
10
High Temperature
Alarm
High temperature alarm value
90°C 0-120°C
11
Pump Required Disables activation of pump relay. If set to NO,
Current Sense (Parameter 12) will auto NO; When
set to YES, Current Sense (Parameter 12) will
auto YES
Yes Yes/No
12 Current Sense Monitors current for presence of pump Yes Yes/No
13
Alarm Relay
Contact Type of Contact for Alarm Output (NO = Relay
in open position; closes on alarm; NC = Relay in
closed position; opens on alarm)
No No/NC
14
Pump Hours Total Operation Hours for Pump (Auto Update)
0 - 999
1 = 24
hours
15 ID Number Address for ModBus 0 0 - 99
16
Battery
Activation Enable or disable the Battery (Maintains date and
time settings if power is lost to the controller - on
first power up battery will automatically activate)
No Yes/No
*NOTE: PARAMETER 1:
If Parameter 1 “Cartridge Present” is set to “YES”, Parameters 2 & 3 are not activated.
If Parameter 1 “Cartridge Present” is set to “NO”, Parameters 2 & 3 are activated and the timer will
be active from that point.
**NOTE: PARAMETER 2:
Parameter 2 “Magnet Only Service Warning”
setting, ( Daily, Weekly or Monthly ) will affect the
default value of Parameter 3 “Magnet Only Service Warning Duration” , e.g. with Parameter 2 set at
the default “Daily” setting, the controller will provide a warning alarm every 2 days by default.
If
Parameter 2 is changed to “Weekly” the controller will provide a warning alarm every 2 weeks.
Default Parameter 3 values can be manually changed during Parameter Programming Mode within
a range of 1 – 12 days, weeks or months as applicable.