background image

2

 

Safety Notices and Precautions 

 

When using this equipment, safety precautions should always be followed, including the following: 

 

 

Please make sure that the operator is an authorized and licensed technician before you allow 

him/her to install and operate the products. Be sure to strictly follow this instruction guide during 
installation and using. The manufacturer is not responsible for any danger or accidents caused by 

improper operation or maintenance. 

 

 

Do not store flammable or explosive objects around the product. Keep all flammable and 

explosive objects at a safe distance away from the product for normal using. 

 

 

Place the product in a reasonable position. Regarding related matters of gas, customers should 

execute the requirements of local gas supply sector. 

 

 

If you smell a gas leak, turn off the gas valves immediately and call the gas company. 

 

 

The product should not be operated by those under 18 years of age, or those with physical or 
mental disorders, or disabilities that lack the necessary knowledge or experience unless with 

appropriate instructions and sufficient safety. 

 

 

Warning! For your safety, do not place petrol and other flammables nearby. Please keep clean 

and free of flammables surroundings. 

 

 

Warning! Any erroneous installation, adjustment and refit may cause property. 

 

 

Do not use out of doors. 

 

 

Damage or personal injury and maintenance failure. Read the instructions carefully before 

installation and using. 

 

 

Warning! Operation instruction must be placed in a conspicuous location. When customers smell 
gas in the process of using, should take safety precautions immediately. Immediately turn off the 

main gas valve, extinguish all heat and flames. Safety information can be obtained from your 

local gas suppliers. 

 

 

DO NOT SPRAY AEROSOLS IN THE VICINITY OF THIS APPLIANCE WHILE IT IS IN OPERATION. 

 

 

The Griddles and outside surfaces may become hot after use, so you must be careful to touch. 

 

 

During operation, do not directly touch burners and cooking grates. 

  

 

Turn off the equipment as repairing, maintaining and cleaning. 

 

 

If the equipment has any problems of equipment damage, gas piping leaks, igniter or valves 

damage, or lose product accessories, do not operate, and call for the service immediately. 

 

 

The use of attachments not recommended or sold by the manufacturer may cause fire, personal 

injury or even death. 

 

 

The equipment is used for cook, not available for any other use. 

 

 

The equipment does not contain any user-serviceable parts. Dealers or technicians will repair it.  

 

 

Do not take apart any spare parts without authorization. 

 

 

Never change any other parts without authorization to this equipment, otherwise, may cause 

hazards, and the manufacturer has the right not to provide warranty service. 

 

 

Steel cutting producers used to manufacture with sharp edges. The manufacturer has dealt with 

these sharp edges during production; however, we insist the operator take care when in contact 

with this piece of equipment. 

 

Содержание EGG-16S























Отзывы: