Control Panel Layout and Buttons Configurations:
RANGE HOOD OPERATIONS
•
While the range hood is off and Auto Function is activated, the blower will turn on to its highest
speed
automatically when the internal temperature is 4 times above the external temperature.
Then it w ill
adjust the speed level (between speed levels F4 to F1) automatically according to the
det ect ed t empera-
ture between the sensors (4 times to 1 time). The speed level can also be
manually overw rit t en by
press the
Increase
or
Decrease
button and Auto Function will reactivate
aft er 2 minut es. The blow er can
ONLY be turned off MANUALLY or activate the delay off timer
finct ion.
•
While the range hood is off, press and hold
Auto Function
button to enter the temperature setting
mode.
Press
Increase
or
Decrease
button to adjust the comparison temperature value between
t he int ernal
and external heat sensors from 8°F to 20°F. The temperature setting mode will exit
aut omat ically aft er
5 seconds of inactivity.
•
Press
Auto Function
button to Turn On/Off the Auto Mode. The Auto Function Icon will appear in
t he
LCD Panel when Auto Mode is On.
In addition to the remote-control feature, this range hood is also equipped with a heat sensor that will selfcali-
brate in 5 seconds when the range hood is first electrically activated and beeps when selfcalibration is
done.
To conserve energy, the LCD panel will turn off automatically after 5 seconds of inactivity.
Adjusting Heat Sensitive Auto Speed (HSAS) Function:
Activating Normal Blower Function:
•
While the range hood is off, press
Increase
or
Decrease
button to start the blower. Press
Increase
but t on
to increase blower speed (F1 to F4) as indicated in LCD panel. The
Increase
button cycles
blow er set t ings
from off (00), quiet speed (F1), low speed (F2), medium speed (F3) to high speed
(F4).
•
While the range hood is on and the blower is running, press
Decrease
button to decrease blower
speed
(F4 to F1) as indicated in LCD panel. The
Decrease
button cycle blower settings from highspeed (F4),
to medium speed (F3), low speed (F2), quiet speed (F1) to off (00).
Activating Light Function:
•
Press Light button once to turn on the lights, and once again to turn off the lights.
CAUTION: DO NOT touch the lights until switched OFF and cooled.
Activating Power-Off Delay Function:
•
While the range hood is on and the blower is running, press Power-Off
Delay but t on t o act ivat e delay
off timer and “Power-Off Delay” icon will appear in LCD panel
.Adjust t o desired period of delay off t imer
by pressing Increase or Decrease button (minimum 1 minute to maximum 15minutes.
Timer begins t o
countdown immediately, when it reaches 0, the blower will shut off.
Adjusting Clock Function:
14
•
While the range hood is off, press Power-off Delay button once to enter the clock setting mode,
press
Increase or Decrease button to set the Hour. Press the Power-off Delay button again to set
t he M in.
Press the Power-off Delay button again to exit the clock setting mode.