background image

19

SERVICE AND WARRANTY

LIMITED WARRANTY

One Year Part s Warrant y:

For one year from t he dat e of original purchase, your local reseller w ill provide free of charge, non-consumable 
replacement  part s or component s t hat  failed due t o manufact uring defect s. Subject  t o t he condit ions and limit at ions 
set  fort h below , your local reseller w ill, at  it s opt ion, eit her repair or replace any part  of it s product s t hat  prove 
defect ive by reason of improper w orkmanship or mat erials. Repaired part s or replacement  product s w ill be provided 
by your local reseller on an exchange basis, and w ill be eit her new  or refurbished t o be funct ionally equivalent  t o new . 
The consumer is responsible for all shipping cost s. Consumable part s not  covered by t his w arrant y include but  not  
limit ed t o: Light  bulbs, met al and cont rol panel.

Who is Covered:

This w arrant y is ext ended t o t he original purchaser for product s purchased for ordinary home use.

This Warrant y Will Be Voided When:
Product  damaged t hrough negligence, improper inst allat ion, accident , abuse, misuse, nat ural disast er, insufficient  or 
excessive elect rical supply, abnormal mechanical or environment al condit ions, or any unaut horized disassembly, 
repair, modificat ion, or failure t o follow  inst allat ion inst ruct ions. When product  is used commercially or ot her t han it s 
int ended purpose. Damaged because of improper connect ion w it h equipment  of ot her manufact urers. Repaired or 
modified by anyone ot her t han your local reseller’ s aut horized agent s. This limit ed w arrant y also does not  apply t o any 
product  on w hich t he original ident ificat ion informat ion has been alt ered, oblit erat ed or removed, has not  been handled 
or packaged correct ly or has been sold as second-hand.

What  is Not  Covered:

Consumable part s such as light  bulbs, met al and cont rol panel. The nat ural w ear of finish, and w ear due t o improper 
maint enance, use of corrosive and abrasive cleaning product s, pads, and oven cleaner product s. Chips, dent s or cracks 
due t o abuse, misuse, freight  damage, or improper inst allat ion. Damage of product  caused by accident , fire, floods or 
act  of God. The manufact urer and/ or dist ribut or/ reseller is not  liable for, and does not  cover under w arrant y, any loss 
ofpropert ies or any cost s associat ed w it h removing, servicing, inst alling, or det ermining t he source of problems w it h 
t his product .

This w arrant y is valid in t he count ry of t he original purchase at  ret ail. It  is non-t ransferable and applies only t o t he 
original purchaser and does not  ext end t o subsequent  ow ners of t his product . Any applicable implied w arrant ies, 
including t he w arrant y of merchant abilit y, are limit ed in durat ion t o a period of express w arrant y as provided herein 
beginning w it h t he dat e of original purchase at  ret ail and, no w arrant ies, w het her express or implied, shall apply t o t his 
product  t hereaft er.

To obt ain w arrant y service, you may cont act  your local reseller from w hich you purchased t his product . Please confirm 
t he t erms of your local reseller’ s policies prior t o cont act ing. Typically, you must  include product  ident ificat ion infor-
mat ion, including model number and serial number w it h a det ailed descript ion of t he problem you are experiencing. 
You must  also include proof of t he dat e of original ret ail purchase as evidence t hat  t he product  is w it hin t he applicable 
w arrant y period.

Cont act  Us

If you need any assist ance, please cont act  your local reseller. Please have your order number and model of t he 
range hood ready. This informat ion w ill help t hem bet t er respond t o your request .

If you need replacement  part s, w e recommend t hat  you only use genuine part s. Our accessories and part s are 
engineered and designed specifically for t his series of range hood, each is rigorously t est ed assuring t he ut most  
in durabilit y and reliabilit y, providing a fact ory mat ch, fact ory-inst alled appearance and funct ionalit y t ailored t o 
each individual range hood model.

Содержание AP238- PS83- 36





















Отзывы: