Adept Ltd, 2-6 McDonald Street, Morningside, Auckland 1025, New Zealand
Page
5 of 10
www.adeptclip.com
3. Operation
3.1 Plug Loading
To load the F4 move the plug in between space in the top arms and position it firmly on the
orange rod head. The orange head is shaped so that the plug will stay in place even if the F4
is inverted.
3.2 Plug Insertion
Hold the F4 Inserter with your dominant hand using a pistol grip and aim the 4 spreader
arms for the anus and push firmly forwards so they are recessed in to approximately 30mm.
Pull the trigger while holding the F4 inserter forward allowing the orange ram to extend to
maximum travel. Maintain forward pressure on the F4 while the plug is being inserted to
ensure correct insertion depth is achieved. Releasing the trigger will retract the ram leaving
the plug lodged in position.
3.3 Cleaning
At shift end the F4 Inserter can be fully immersed in hot water and cleaned thoroughly as
part of usual equipment end of processing clean-up. The unit has drainage channels in the
handle which allows the inside of the unit to be flushed.
