ADEMCO 7845CZ, Инструкция по установке и настройке

Страница: 28 / 64

7845CZ Installation and Setup Guide
5–2
Table 5. 7845CZ Programming Defaults Summary for Zone Mode
PROGRAMMING OPTION
STANDARD DEFAULT
VALUE ACTUAL ENTRY
1 City * xx
2 CS ID * xx
3 Sub ID# * xxxx
4 Supervision 24 hours
5 Time Zone Eastern
6 Carrier Select Auto
7 Flt Time (min) 5
8 Old Alarm Time 10 minutes
9 DC Loss Rpt Y
10 Current Lim (Y/N) N
11 Flt Rel On (Y/N) N
12 Trigger Type EOLR
13 Lynx Panic (Y/N) N
14 Tamper Rpt (Y/N) Y
15 Invert Zn3 (Y/N) N
16 Invert Zn4 (Y/N) N
17 Invert Zn5 (Y/N) N
18 Invert Zn6 (Y/N) N
19 Invert Zn7 (Y/N) N
20 Arm/Dis En (Y/N) N
21 Delay Zn3 (secs) 00
22 Delay Zn4 (secs) 00
23 Delay Zn5 (secs) 00
24 Delay Zn6 (secs) 00
25 Delay Zn7 (secs) 00
26 Restore Zn1(Y/N) Y
27 Restore Zn2(Y/N) Y
28 Restore Zn3(Y/N) Y
29 Restore Zn4(Y/N) Y
30 Restore Zn5(Y/N) Y
31 Restore Zn6(Y/N) Y
32 Restore Zn7 (Y/N) Y
33 Telco Chan 00
34 Open/Close 00
35 2
nd
CS Rpt (Y/N) N
Using a 7720P Programming Tool
The 7845CZ powers the 7720P Programming Tool via the programming jack.
NOTE: Some 7720Ps will not function when powered from the 6-volt battery in the 7845CZ.
In this case, the 7845CZ needs to be connected to a 12VDC source on TB1 in the control
panel.
Each key of the 7720P has two possible functions: a normal function and a Shift function. To
perform a normal key function, simply press the desired key. To perform a Shift function,
press the [SHIFT] key, and then press the appropriate key. For a description of each normal
and shift key function, refer to Table 6.