ADE M301020 Series, Руководство по эксплуатации

Страница: 10 / 16

10 M301020-01-210322-Rev005-UM-e
Print out a record
The scales must be at standstill, e.g. standstill status display (14) appears at the screen.
Press the ENTER key (13) to send the data to the serial interface.
Note: Printing is not possible if the net weight is 0. The print function only produces one print-out. A reset is
required to print out another copy.
Care, servicing and recalibration
Cleaning
Please disconnect the unit from the operating voltage before cleaning. Do not use any aggressive cleaning
materials for cleaning; only use a damp cloth or conventional disinfectant.
Make sure that no liquids penetrate the unit!
Error messages
Error mes-
sage
Description Problem solution
Overload display
Weight exceeds max. capacity of the
scales.
Overflow indicator (negative)
Negative weight indicated – weight too
low to be displayed (<=99999).
Overflow indicator (positive)
Positive weight indicated – weight too
high to be displayed (>=999999).
AD LOW
A/D above negative range
Check if the scales are correctly as-
sembled or if they are damaged.
AD HI
A/D above positive range
Check if the scales are correctly as-
sembled or if they are damaged.
EE SUM
Parameter or calibration error
Recalibrate – please contact your sup-
plier or service partner:
EE WR
EEPROM indicates an error
Please contact your supplier or service
partner.
PM SUM
Internal program indicates a check error
Please contact your supplier or service
partner.
HOFSET
Switch on – above zero
Please remove the weight from the
scales and restart.
LOFSET
Switch on – below zero
Check scales for damage and inform
your service partner:
UOFSET
Irregular
Do not touch the scales after they have
been switched on.