Alarm
32
DCF Radio Alarm Clock CK 1708 | CK 1709
When the timer is enabled, "SLEEP" flashes in the display.
If you want to deactivate the function again, select the option "OFF"
instead of a time value.
Alarm
You can set two different alarm times with the radio-controlled alarm clock: A1 and A2.
The procedures for setting are identical.
Setting the alarm time
If there is more than approx. 20 seconds between two pushes of a
button, the setting process automatically ends and you will have to
repeat it. Settings you have already made remain saved.
Observe the display during setup. There you will also see which settings
you are currently making: A1 and A2 = alarm times, SN = snooze time.
If you press and hold + or – button, the displayed values change more
quickly.
1. Press and hold the
alarm
button.
The display shows
and the hour digit flashes.
If you wish to set alarm time "2", repeatedly press
alarm
until
is displayed.
2. Use
+/–
to set the desired alarm hour.
3. Press
alarm
to confirm the setting.
The minute indicator flashes in the display.
4. Use
+/–
to set the desired alarm minute.
5. Press
alarm
to confirm the setting.
The "snooze time" (the time between two alarm repetitions) flashes in the display.
6. Use
+/–
to set the desired snooze time (default setting: 5 minutes)
7. Press
alarm
to confirm the setting
The hour indicator for alarm time 2 flashes in the display.
8. Proceed as described to set the second alarm time or press
alarm
repeatedly until
the display shows the normal time again.
9. Enable the respective alarm function (or both) by sliding the 1 or 2 switch to
on.
The set alarm time and the corresponding alarm symbol
or
are shown on the
display.
The alarm function is enabled, the setting process is finished.
Druckbuch CK 1708_1709.indb 32
24.10.2017 12:56:24