www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
All data will be
lost,Erase? No
Press
ENT
again and the LCD will prompt you t
the erase operation.
Full Erase HDD
This function is used to full erase all data on the HDD. Please backup any important
data before
using this function.
11-05.Adv Setup
Full Erase HDD
Quick Erase
HDD
ALL/Target CH:*
Press
ENT
to enter the following screen. Use the Up and Down buttons to select the HDD to
erase.
All data will be
lost,Erase? No
Press
ENT
again and the LCD will prompt you t
the erase operation.
Test IDE 0/1
OK
LCD Test Start
Button Test
?
SDRAM Test:
8192Kbytes OK
FlashTest: OK
hed
Once the system diagnostics
have been completed the "Test finished" message will appear on the
LCD.
Press
ENT
and the system will begin the tests as shown below.
H/W Diagnostic
Press
ENT
to enter the following screen. This function is used to c
heck that the system is
operating normally.
11-06.Adv Setup
H/W Diagnostic
Press
ENT
again to enter the following screen. The LCD will cycle through the test categories as
they are performed. The L
CD display is t
the control panel is tested next (requires
manual operation), then followed by the system's internal diagnostics, hardware connection test
then the RAM and SD Flash test. All test results are shown on the LCD. This is a simple way to
verify that the system is operating
normally.
