Additel 273E Series, Руководство пользователя

Страница: 47 / 56

37
5. Data management
On the main page of the device, click the file management button in the middle of the bottom to enter the file
management interface. The file management interface is classified and managed by functional modules, and the data
saved by each function is managed in the corresponding folder for convenience.
The functional modules that can save data files are: snapshot, PSV test and leak test. In the corresponding folder, the
users can open the operation menu through the menu button in the upper right corner, and delete or batch delete the
files in it.
6. Quick test
The calibrator provides a convenient quick test function, which is used for calibrating variety of pressure devices. At the
same time, the calibration data can be automatically collected, stored, analyzed and viewed. Click the task icon on
the main interface of the device or click the task icon at the top right in the calibrator interface to enter the test
interface.
The quick test provides task types for three types of pressure devices: pressure gauge, pressure transmitter and
pressure switch. The procedures are as follows:
(1) Create the task: Click corresponding items in the interface according to DUT (Device Under Tested) type.
(2) Complete the necessary information of the test in the “Create the Task” interface (for example: DUT range, accuracy,
etc.), then click icon
to start.
(3) Click icon to record the DUT readout and the measured value of the calibrator. For the pressure gauge, the
user needs to manually input the current readout. Click icon to delete last entered data.
(4) After the task is finished, click the save button and complete the information required for saving the task data in
the pop-up task saving interface. Click OK button to save the task data.
(5) For tasks that have been performed and saved, the task results will be showed in the task list on the history data list.
Click icon in the quick test interface to review the history data. The icon in the task list indicates that test failed;