Addi-Data APCI-3000 Скачать руководство пользователя страница 51

Страница: 51 / 59

APCI-3xxx Standardsoftware

Functionality Sample

number

Description

SAMPLE02 Reads 1 analog input channel with interrupt.

The user defines the channel he wants to use.
The user defines the interrupt mode (synchronous,
asynchronous)

SAMPLE03 Reads more analog input channels without interrupt.

SAMPLE04 Reads more analog input channels with interrupt

The user defines the interrupt mode (synchronous,
asynchronous)

SAMPLE07 Initialises

the SCAN with interrupt

The user defines the external trigger mode and gate mode if
these are available.
The user defines if he wants to use the delay and enters its
value.
The user defines the interrupt mode (synchronous,
asynchronous)

Digital input

SAMPLE00 Gets the selected digital input channel information.

SAMPLE01 Reads 1 digital input

SAMPLE02 Reads 2 digital inputs

SAMPLE03 Reads 4 digital inputs

SAMPLE04 Reads 8 digital inputs

SAMPLE05 Reads 16 digital inputs

SAMPLE06 Reads 32 digital inputs

Digital outputs

SAMPLE01

Tests 1 digital output with or without Output Memory Option:
Gives the status of the digital output, if possible.

SAMPLE02

Tests 2 digital outputs with or without Ouptut Memory
Option. Gives the status of the digital outputs, if possible

SAMPLE03

Tests 4 digital outputs with or without Output Memory
Option. Gives the status of the digital outputs, if possible.

SAMPLE04

Tests 8 digital outputs with or without Output Memory
Option. Gives the status of the digital outputs, if possible.

SAMPLE05

Tests 16 digital outputs with or without Output Memory
Option. Gives the status of the digital outputs, if possible.

SAMPLE06

Tests 32 digital outputs with or without Output Memory
Option. Gives the status of the digital outputs, if possible.

Timer

SAMPLE00

Shows all timer information

SAMPLE01

Initialisation

1 timer without interrupt.

The user can trigger the timer by key press.

Содержание APCI-3000




























































Результаты поиска

Содержание APCI-3000

Отзывы:

Похожие инструкции для APCI-3000

Бренды по названию

Популярные бренды

Addi-Data APCI-3000, Техническое описание

Результаты поиска

Содержание APCI-3000

Отзывы:

Похожие инструкции для APCI-3000

Бренды по названию

Популярные бренды