background image

 

 

Product information 

This manual contains the technical installation and important instructions for correct commissioning 
and usage, as well as production information according to the current status before printing. 
The content of this manual and the technical product data may be changed without prior notice.  
ADDI-DATA GmbH reserves the right to make changes to the technical data and the materials 
included herein. 

Warranty and liability 

The user is not permitted to make changes to the product beyond the intended use, or to interfere with 
the product in any other way.  
ADDI-DATA shall not be liable for obvious printing and phrasing errors. In addition, ADDI DATA, if 
legally permissible, shall not be liable for personal injury or damage to materials caused by improper 
installation and/or commissioning of the board by the user or improper use, for example, if the board is 
operated despite faulty safety and protection devices, or if notes in the operating instructions regarding 
transport, storage, installation, commissioning, operation, thresholds, etc. are not taken into 
consideration. Liability is further excluded if the operator changes the board or the source code files 
without authorisation and/or if the operator is guilty of not monitoring the permanent operational 
capability of working parts and this has led to damage. 

Copyright 

This manual, which is intended for the operator and its staff only, is protected by copyright. 
Duplication of the information contained in the operating instructions and of any other product 
information, or disclosure of this information for use by third parties, is not permitted, unless this right 
has been granted by the product licence issued. Non-compliance with this could lead to civil and 
criminal proceedings. 

ADDI-DATA software product licence 

Please read this licence carefully before using the standard software. The customer is only granted the 
right to use this software if he/she agrees with the conditions of this licence. 
The software must only be used to set up the ADDI-DATA boards. 
Reproduction of the software is forbidden (except for back-up and for exchange of faulty data 
carriers). Disassembly, decompilation, decryption and reverse engineering of the software are 
forbidden. This licence and the software may be transferred to a third party if this party has acquired a 
board by purchase, has agreed to all the conditions in this licence contract and the original owner does 
not keep any copies of the software. 

Trademarks 

-

 

ADDI-DATA is a registered trademark of ADDI-DATA GmbH. 

-

 

Turbo Pascal, Delphi, Borland C, Borland C++ are registered trademarks of Borland Insight 
Company. 

-

 

Microsoft C, Visual C++, Windows XP, 98, Windows 2000, Windows 95, Windows NT, 
EmbeddedNT and MS DOS are registered trademarks of Microsoft Corporation. 

-

 

LabVIEW, LabWindows/CVI, DasyLab, Diadem are registered trademarks of National Instruments 
Corp. 

-

 

CompactPCI is a registered trademark of PCI Industrial Computer Manufacturers Group. 

-

 

VxWorks is a registered trademark of Wind River Systems.

 

 

-

 

 

Содержание ADDINUM PA 1500

















































































Отзывы: