8
CONTENTS
INTR
ODUCTION
INST
ALLA
TION
OPERA
TION
FUR
THER
INFORMA
TION
Connections at the remote module
1 Place the remote module adjacent to the user location.
2 Connect a dual link DVI-D cable from the video monitor to
the DVI output socket of the remote module.
To video monitor
3 Connect the leads from the keyboard and mouse
to the two USB sockets on the remote module.
To keyboard, mouse
and other USB
peripherals
Note: The total current that may be drawn from the USB ports is 1.2A, which should be
sufficient for a keyboard, mouse (no more than 100mA each) and any two other devices
(500mA maximum each). If more power for USB devices is required, please use a powered
USB hub.
4 Optionally connect a set of stereo speakers
to the module.
To speakers
5 Connect the link cable (see
page 2
for cable advice) to
the remote module socket labeled
TO LOCAL
.
CATx link cable
IMPORTANT:
• This is NOT an Ethernet port and must not be connected to network
switches or any device other than the X-DVIPRO-DL local module.
• The X-DVIPRO-DL (dual link) extenders are NOT compatible with the
standard X-DVIPRO (single link) versions. Where both types are being
used in close proximity, take care not to cross connect the local and
remote modules between the two versions.
Note: If dual link screen resolutions are required,
the DVI-D cables used at both the local and
remote modules must be
dual link
types.
