ADDERview
Installation and Use
Page 20
For example, consider a situation where two ADDERview 4 port units are connected
together as shown below. To connect to the computer attached to port 3 on
ADDERview B the user would hold down the hotkey keys then press ‘2’ followed by
‘3’, whilst keeping the hotkey keys pressed. This will have the effect of connecting to
port ‘3’ of the ADDERview which is connected into port ‘2’ of the first ADDERview
unit A.
For example to connect to port 3 on the ADDERview cascaded off port 2 of your first
ADDERview use:
press
ba
ba2
2
release
2
2
press
3
3
release
3
3ba
ba
A typical cascade of two ADDERview 4 port units
