page 24
ADDAC SYSTEM
Imagine the User has already pressed the
PRESETS
Button for aprox. 1
second and entered in its Menu Window, the Menu Buttons already
changed to the configuration shown in image 1, displaying the default
Active Preset (Button 1).
Image 2
Image 1
Default value is PRESET 1 (Button 1).
INTUITIVE MENU
PRESETS
Operation
- Buttons 1 to 11
Ex. IX
A. LOADING
If it’s the User’s wish to Load, for Ex., Preset 4 he
just needs to press Button 4 twice.
Once the first push occurs the led below will
light up. After the second push it will load
Preset 4 and Exit to the Main Mode Window.
If Preset 4 was already selected pressing it a
second time will not load it again but rather
return to the Main Window leaving the volatile
memory intact, meaning that any settings that
might have been changed in the meantime are
kept changed and not freshly loaded from
Preset 4 saved data.
If the User needs to clean all changes made
and load back Preset 4, he just needs to load
any other preset and then load back Preset 4.
B. SAVING
If it’s the User’s wish to Save the current config-
uration in Preset 5 he just needs to light Button
5 and after that Push and Hold the
PRESETS
Button (12) for 3 seconds, after which the
button’s leds will blink and exit to the Main
Window.
ADDAC207 INTUITIVE QUANTIZER
USER’S GUIDE
April.2021
Revision.05