manualshive.com logo in svg

ADDAC System ADDAC207, Руководство пользователя, Страница: 14 / 36

Поделиться
Скачать
ADDAC System ADDAC207 Скачать руководство пользователя страница 14

page 13

ADDAC SYSTEM

INTUITIVE MENU

(cont.)

2. MOOG / BUCHLA Standard (BUTTON 10)

In Eurorack we use the Moog 1v/octave standard but in Buchla land 

they use 1.2v/octave.

Button 10 is an indicator for which standard the quantizer operates 

to.

Pressing Button 11 & 12 at the same time will change Button 10 

state, Off is for Moog Standard, On is Buchla

3. FINE TUNING (BUTTONS 1 to 4, 11 and 12)

This is the Function for User’s fine tuning to adjust it’s 1v/octave 

ratio to any particular VCO reaction.

Fine Tuning is independent for each voice. 

Buttons 1 to 4 show which voice is active, pressing each of these 

Buttons selects a new voice for Fine Tuning.

After the voice is selected, pressing button 11 will increase the 

1v/octave relation in intervals of 0.001mV; Pressing button 12 will 

decrease the 1v/octave relation in intervals of 0.001mV.

These settings can be saved permanently in non-volatile memory 

pressing button 10. This will also Exit the Menu Window.

BUTTON 11 = SCALE MODE(BUTTONS 1 to 7 and 11)

Scale Mode defines which Mode (Ionian, Dorian, Phrygian, Lydian, 

Mixolydian, Aeolian, Locrian) abreviated in White to match mode 

numbers in Yellow ( 1=I, 2=D, 3=P, 4=L, 5=M, 6=A, 7=L).

This Setting is only used when Pressing the Set Key Button and 

normally is Byppassed.

To activate the Scale Mode function press Button 11 and its light 

will change state, Lit is ON.

BUTTON 12 = PRESETS (BUTTONS 1 to 11)

Presets Store all the information related to the Scale defined in 

Quantizer Main Mode as well as the main Menu settings (page 26).

When entering this window there will be only one led lit indicating 

which preset is currently being edited.

To select and change settings to a new preset just press the 

desired one, the button will light up and pressing again will load it 

and exit the Menu Window.

To save a preset, select the preset button you wish to save to and 

hold the PRESET Button (12) for aprox. 3 seconds, after which it will 

exit the Menu Window.

ADDAC207 INTUITIVE QUANTIZER 

USER’S GUIDE

April.2021

Revision.05

Содержание ADDAC207





































Отзывы:

Нет отзывов