10
2. Put ONE mercurial unit in a polybag and seal it with a twist tie
or rubber band closure.
3. Wrap bubble wrap around the mercurial unit and secure with
adhesive tape. This will help prevent the port connector from
puncturing the second polybag.
4. Enclose the wrapped mercurial unit in another polybag. Seal
the polybag with another twist tie or rubber band closure.
5. Place the double polybagged and wrapped unit inside the
packing case,or inner carton.
6. Arrange some cushioning bags or more bubble wrap around
the mercurial unit to protect it from excessive shifting.
7. If returning two or three mercurial units, repeat steps 1-6 as
necessary. We suggest packaging each of the mercurial units in
separate inner cartons that can fit into the packing case.
8. Seal the packing case closed with a strip of adhesive tape.
Carefully place the
specially authorized
return address label to
the top of the box.
9. Ship via UPS Prepaid Ground Service ONLY. No other carriers
are authorized use for safe return of mercury instruments.
What is a Safety Data Sheet (SDS)? Why do I need it and how
do I get one?
An SDS sheet is required by OSHA. All medical locations require you
keep it on file. An SDS provides you with information about mercury,
and what protective measures you have to do for your safety. Your
ADC dealer will provide you with the SDS upon request.
The information contained within this guide is provided in good faith
and is believed to be correct as of the date published. ADC makes no
representation as to the completeness or accuracy of the information.
It is understood that the person receiving this information will use
good judgement to determine proper actions to be taken. Information
contained within does not provide any warranties, expressed or im-
plied.
