150-450-132-02, Issue 02
Installation
HRE-450 List 2B, List 3B, and List 4B
March 6, 2000
5
I
NSTALLATION
This section describes the tools and procedures for installing the HRE-450.
I
NSTALLATION
K
IT
The HRE-450 installation kit components are listed in Table 2. If any items are missing, or the shipment is
damaged, please contact your ADC sales representative.
L
OCATING
THE
N
ECESSARY
T
OOLS
To install the HRE-450, you need the following tools:
•
Blade screwdriver
•
Drill
•
Wood/metal or concrete drill bit, depending on installation surface
•
Hammer
•
Type 216C (7/16 inch) wrench
Table 2.
Installation Kit
Quantity
Description
1
HiGain Remote Enclosure (HRE) 450 Technical Practice, Section 150-450-132-xx
2
Three wood screws (#10 x 1.5 inch)
1
Three anchor nuts (#10 x 1 inch)
2
Three flat washers (#10 CPS/ZPS)
2
One cable tie (5.5 inch length, 0.15 inch width)
