150-450-132-02, Issue 02
Installation
HRE-450 List 2B, List 3B, and List 4B
March 6, 2000
9
The wiring diagram and product barcode label are located on the reverse side of the HRE-450 cover. See
Figure 5
.
Figure 5.
Wiring Diagram and Barcode Label Locations
W
IRING
THE
HRE-450 L
IST
4B (N
O
S
TUB
)
Connect the HRE-450 List 4B to the signal cables and ground wire:
1
Loosen the compression connector nuts on the bottom of the HRE-450 using one of the following methods:
•
Using your hand, turn the compression connector nuts counterclockwise.
•
If the compression connector nuts are too tight to loosen by hand, use groove-joint pliers to hold each
cable fitting center locknut, then use groove-joint pliers to turn each compression nut counterclockwise.
Figure 6.
Bottom View of the HRE-450
