ADB SOFTLUX, Инструкция по эксплуатации

Страница: 4 / 16

SOFTLUX
Cool Lights
Manual - page 4
I s s u e : 0 0 3
Lighting Technologies
Advice before Use
• Read carefully these instructions.
• As soon as the equipment is delivered, open the packing and inspect the equipment carefully.
If you notice any damage, contact immediately the transport company and register your
complaint in the required format listing the defects.
You may be sure that this equipment left our factory in perfect condition.
• Check if the received equipment is consistent with the delivery notice and if this delivery notice
is consistent with your order.
If it is not, contact immediately your supplier.
General Remarks
This luminaire is a piece of lighting equipment designed for professional use only on stages,
indoor television or film studios.
Designed and built in accordance with EN 60598-1 and EN 60598-2-17 safety regulations, it must
imperatively be connected to electrical earth by means of its earth wire.
To prevent any electrical shock, there is no need to open this equipment when in use.
If internal access is needed for control, service or repair purposes, always refer to qualified personnel.
In all events, always unplug the power supply cable before opening the unit,
lethAl voltAGe pResent inside
It is the user’s responsibility to use the luminaire for its intended purpose and to check the equipment
that might be connected to it.
The luminaire can under no circumstances be modified.
ADB will not assume any responsibility in case of damage resulting from modications made to
the luminaire.
This luminaire is a piece of professional equipment designed for easy and simple use. Nevertheless,
always refer to qualified personnel for any installation or repair work.
important Remark
Power supply cables and other connections are essential for your equipment and contribute
greatly to a safe and trouble free operation.
• Always hold the cover of the plug when disconnecting a cable, never pull the cable.
• Never use cables or connectors in bad condition, check them before installation and periodically
thereafter.
• Never tie power supply and data cables together.
important instructions for use
Always keep these instructions close to where the unit is being used.