ADB M 5083, Руководство пользователя

Страница: 62 / 70

Helpful Tips
User Manual - page 60 www.adblighting.com
Issue 1.1
ATTENTION: when you insert the iris, it must be in the Open position.
10.1.3 How to remove iris / gobo holder
Before removing an accessory it is important to set both accessory slots to the
insert
position.
This is the equivalent of the ‘click’ positions for the manual
WARP
.
This can be achieved in different ways.
- OR: use the CHNG function
- OR: use the DMX console and set the DMX value to zero (for Gobo as well as for
Iris).
It might be useful to create a suitable ‘home position’ in your console.
- OR: use the local menu:
SLOT Enter FRNT Enter will automatically position both rings in the insert position;
then select the proper setting.
Repeat this for SLOT Enter REAR Enter.
Then remove the holder. Squeeze the two 'handles' towards each other on either side, to
release the locking mechanism, and pull out the holder.
Set
WARP online if necessary or reconnect the data cables if necessary
Accessory calibration: only while no accessory is inserted