ADB Safegate SafeLED IQ SL-RGL-E, Руководство пользователя

Страница: 38 / 46

The workshop maintenance refers to following:
•
Replacing the glass
•
Replacing the LED Printed Circuit Board (PCB)
7.2.1 Replace the glass
Remove
1. Disassemble the front plate (A).
2. Remove the O-ring gaskets and the washer gaskets (B).
3.
Remove the glass (C).
Replace
1.
Place new the glass (C) with the milled surface up in position.
2. Place new O-ring gaskets and washer gaskets (B) in position.
3.
Place the front plate (A) in position.
4. Fasten the screws on the front plate with a torque of 6.5Nm.
7.2.2 Replace LED PCB
Remove
1. Disassemble the front plate (A).
2.
Remove the gaskets and the glass (B).
3. Unscrew the light fixture screws in the LED PCB.
4.
Disconnect the cable to the LED PCB (C) and remove the LED PCB.
Replace
1.
Connect the cable to the LED PCB (C) unit and place it in position.
2. Fasten the screws on the LED PCB.
3.
Assemble the glass and the gaskets (B).
4. Fasten the screws on the front plate (A).
SafeLED IQ Elevated Light
Maintenance
28
Copyright
©
ADB Safegate, All Rights Reserved