ADB Safegate SafeLED IQ SL-RGL-E, Руководство пользователя

Страница: 30 / 46

The SafeLED IQ can also be programmed during maintenance or updated remotely from the sub-station if installed in a circuit
using the Wake on Circuit function.
6.2.1 Hardware equipment set up
The following hardware is required for SafeLED IQ programming:
•
SCM – Series Circuit Modem
•
LPC – SafeLED IQ/Sensor Interface Unit (SIU) Programming Control unit
•
Cable(s) – power and communication
•
PC – including ASP Maintenance Tool (AMT) software for programming
Connect the LPC unit to the SCM unit
The following are instructions how to set up the hardware equipment required for SafeLED IQ programming.
Figure 9: LPC and SCM unit
Connection Box
Arbitrary wire orientation
230/240 VAC
or 100/115 VAC
Cable 5949114
Connection Box
SDM 591677
LPC 591859
LPC 1859
SCM 591677
SCM 591677
LPC 591859
Power cord
Power cord
Power cord
Disassemble/assemble EMI cable gland
with cable and make sure that
shield gets properly connected
0829F-0825M
0829F-0825M
1. Make sure the voltage selector is in the appropriate position: 120 or 240 V.
2. Connect the LPC unit to the SCM unit using the cables supplied. Connections are made at the rear of each unit.
SafeLED IQ Elevated Light
Operation
20
Copyright
©
ADB Safegate, All Rights Reserved