ADB Safegate L-858 AGSF Series Скачать руководство пользователя страница 28

Страница: 28 / 56

WARNING

Sign frangible couplings are uniquely designed for use on the sign size stamped on the coupling and can only be

used for that particular size sign. If couplings must be replaced, make sure the sign size on the couplings matches

the size sign on which they are to be installed.

3. Connect an AWG 12 (minimum) ground wire to the earth ground lug on the bottom of the sign. Refer to

Wiring

. Refer to

Schematics

for electrical connections.

WARNING

Lock out power before making any electrical connections. Failure to observe this warning may result in personal

injury, death, or equipment damage.

4. Install optional tether. Refer to

Optional Tethers

5. Plug the cord set into the sign and the transformer.
6. Reinstall panels (if removed) and top lid (if removed). Refer to

Repair

for more information on installing the lid.

3.3.3 Optional Lamps-Out Indicator Mounting

See

Figure 6

. Signs with optional Lamps-Out Indicator (LOI) are factory-installed and shipped with an LED mounted on one

side of the sign. The LOI LED comes wired and is set at medium intensity. The LOI can be used only on halogen lamp Style 2

and Style 3 signs.

Figure 6: Lamps-Out Indicator Kit Assembly

. Once the sign is installed, it is possible to change the LED intensity and the side of the sign in

which the LED is activated. To determine which LED to make active, open the sign and plug the desired LED connector onto

the ACTIVE header on the LOI PCB.
The LOI LED intensity level (Low, Medium, and High) can be changed by opening the sign and moving the intensity jumper

shunt on the LOI PCB to the desired level.

L-858 AGSF
Installation

18
Copyright

Содержание L-858 AGSF Series





















































Результаты поиска

Содержание L-858 AGSF Series

Отзывы:

Похожие инструкции для L-858 AGSF Series

Бренды по названию

Популярные бренды

ADB Safegate L-858 AGSF Series, Руководство пользователя

Результаты поиска

Содержание L-858 AGSF Series

Отзывы:

Похожие инструкции для L-858 AGSF Series

Бренды по названию

Популярные бренды