ADB Safegate L-858 AGSF Series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 56

background image

1.1.3 Material Handling Precautions: Storage

CAUTION

Improper Storage

Store this equipment properly

• If equipment is to be stored prior to installation, it must be protected from the weather and kept free

of condensation and dust.

Failure to follow this instruction can result in equipment damage

1.1.4 Material Handling: Heavy Equipment

DANGER

Unstable load

Use caution when moving heavy equipment

• Use extreme care when moving heavy equipment.
• Verify that the moving equipment is rated to handle the weight.
• When removing equipment from a shipping pallet, carefully balance and secure it using a safety

strap.

Failure to follow this instruction can result in death, serious injury, or equipment damage

1.1.5 Operation Safety

CAUTION

Improper Operation

Do Not Operate this equipment other than as specified by the manufacturer

• Only qualified personnel, physically capable of operating the equipment and with no impairments in

their judgment or reaction times, should operate this equipment.

• Read all system component manuals before operating this equipment. A thorough understanding of

system components and their operation will help you operate the system safely and efficiently.

• Before starting this equipment, check all safety interlocks, fire-detection systems, and protective

devices such as panels and covers. Make sure all devices are fully functional. Do not operate the

system if these devices are not working properly. Do not deactivate or bypass automatic safety

interlocks or locked-out electrical disconnects or pneumatic valves.

• Protect equipment with safety devices as specified by applicable safety regulations.
• If safety devices must be removed for installation, install them immediately after the work is

completed and check them for proper functioning.

• Route electrical wiring along a protected path. Make sure they will not be damaged by moving

equipment.

• Never operate equipment with a known malfunction.
• Do not attempt to operate or service electrical equipment if standing water is present.
• Use this equipment only in the environments for which it is rated. Do not operate this equipment in

humid, flammable, or explosive environments unless it has been rated for safe operation in these

environments.

• Never touch exposed electrical connections on equipment while the power is ON.

Failure to follow these instructions can result in equipment damage

96A0286, Rev. AT, 2020/09/16

3

Copyright

©

ADB Safegate, All Rights Reserved

«
...
11
12
13
14
15
...
»

Содержание L-858 AGSF Series

























































Отзывы:

Нет отзывов

Похожие инструкции для L-858 AGSF Series

Бренд: Ecco Страницы: 4

Бренд: JD Squared Страницы: 15

Бренд: DAPAudio Страницы: 16

Бренд: 3M Страницы: 28

Бренд: Jacobsen Страницы: 6

Бренд: Taurus Страницы: 28

Бренд: Kärcher Страницы: 54

Бренд: ABB Страницы: 85

DVCPRO P2 Series

Бренд: Panasonic Страницы: 32

Бренд: B-K lighting Страницы: 3

Бренд: Eaton Страницы: 21

Бренд: NANO Страницы: 4

Бренд: Eazyzap Страницы: 32

Бренд: Obdstar Страницы: 42

Бренд: R&S Страницы: 371

Бренд: R.M. Young Страницы: 9

Бренд: Ironton Страницы: 6

Бренд: Gardena Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды