background image

 

 

 

AT6 

6-Zone 100V Attenuator & Source Selector 

Item ref: 952.476UK 

User Manual 

 

 

 
 
 

 
 
 

 
 
 
 

 
 
 

 
 

 

 

 
 
 

 
 
 

 
 
 
 

 
 
 

 
 

Version 1.0 

 

 

Caution: Please read this manual carefully before operating 

Damage caused by misuse is not covered by the warranty 

Содержание AT6

Страница 1: ...AT6 6 Zone 100V Attenuator Source Selector Item ref 952 476UK User Manual Version 1 0 Caution Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty ...

Страница 2: ...uld cause damage to the amplifiers or the AT6 Each output of the AT6 has a maximum power rating of 30W Ensure that the combined tapped power of speakers connected to a single output does not exceed 30W Safety If liquids are spilled on the casing stop using the AT6 immediately allow the unit to dry out and have checked by qualified personnel before further use Avoid impact extreme pressure or heavy...

Страница 3: ...utput terminal from an amplifier to the terminal of IN A on the AT6 12 Connect the COM output terminal from the same amplifier to the terminal of IN A on the AT6 If another amplifier is to be used as a second source repeat the above steps for IN B terminals 10 Between the terminals for IN A and IN B are another pair of screw terminals labelled EMG 24V 11 These may be connected to the 24V trigger o...

Страница 4: ... turn up the volume part way Press the source select button for each zone to the in position selecting B as the input Gradually increase the volume control for each zone in turn checking for output from the speakers When checking is complete adjust the output of the amplifier and zone volume controls as required If the 24V EMG is connected to an emergency panel test that it mutes all zone outputs ...

Отзывы: