ADASH Ltd.
Adash 4900 – Vibrio M
Further technical and contact information can be found at www.adash.com
42
Using the memory
(Advanced version only)
Off-Route measurements
With the A4900 - Vibrio M instrument you can store all measured data (measurements screen) to the
memory (except FASIT screen). Each measurement is stored to specific address (Point ID) from 1 to
250. Each point can contain several stored measurement screens - measured data.
Press the middle
button to save data from measurement screen (except FASIT screen). On the
screen appears “Blue Menu” with options: MENU, SAVE, ESC.
No data to save, SAVE is disabled
MENU
- Instrument menu
SAVE
- Go to save data screen
ESC
- Escape
Push SAVE button. The address screen with point address appears. The last point number with which
you worked is displayed. If this point contains data, then USED is displayed.
Point with saved data
Point without saved data
Use
▼
▲
buttons and select required point address number. If you push button longer then the
movement is faster. Then press middle
set button.
The new properties are displayed regarding the selected data to save.
