ADASH Ltd.
Adash 4900 – Vibrio M
Further technical and contact information can be found at www.adash.com
34
If the error is detected (e.g. “SENSOR ERROR"), then some item are not available. Move between
items by pressing
▼
▲
buttons. Select item by pressing
button. Use - ESC for return from Menu.
Fig.: Instrument MENU.
Fig.: Instrument MENU in error state.
LIGHT - TORCH
In LIGHT mode it’s possible to use instrument like a torch. Select the LIGHT mode and press
button. White LEDs on the front side begins to light. Symbol of a torch appears on display. Press any
button to switch off the light and the instrument starts to measure again.
Fig.: Torch mode
LIGHT - STROBO
In STROBO mode you can use the instrument as a stroboscope. White LEDs on the front side begins
to flash with a frequency, which is set up on the screen. If the speed detection is known, then
frequency of flashes is set to that value. By pressing
▼
▲
buttons you can also change that frequency
manually. The step (1, 10, 100 RPM) is displayed on the bottom line of the screen. Press the
button and the STROBO menu appears. You can switch-off (STOP) the stroboscope or change the
step frequency tuning.
Fig.: STROBO mode
Fig.: STROBO mode menu
Pre-set frequency
in RPM and Hz
Pre-set step
▼▲
increasing /
decreasing
Escape
STROBO mode
Options of
frequency step
