Adaptive® JUNIOR – Technical and HMI User Guide
REV 1.04
5
1.4.
Electrical Installation
Figure 2. shows the required hardware for a thermoelectric control application using Adaptive JUNIOR.
Figure 2. Thermoelectric Cooling / Heating Application Setup
Figure 3a. below, shows the recommended wiring diagram for connecting the components making up a typical
thermoelectric system. To keep potential interference problems to a minimum ensure that the wires used for
connecting the power supply to the controller, and especially from the controller to the thermoelectric assembly (‘TE
OUT-‘ and ‘TE OUT+’ ), are sized correctly for the module’s power and kept as short as possible. Wire lengths can be
optimised by mounting the JUNIOR controller right at the thermoelectric assembly’s connection output.
Figure 3a. Wiring diagram of minimum level installation
Figure 3a. shows the JUNIOR controller in a complete system setup.
