4-6
DuraStor 6220SS/7220SS Installation and User’s Guide
The Drive Status LED (on the left) indicates the status of the
corresponding disk drive. The Drive Activity LED (on the right)
flashes to indicate I/O activity on the corresponding disk drive.
Table 4-4
explains how to interpret the Drive LEDs.
Table 4-4. Drive Status and Activity LEDs
Drive Status LED
Drive Activity
LED
Status
Solid green
Solid green
Powering on.
Flashing green
Solid green
Drive ready, not assigned to
an array.
Solid green
Solid green
Drive ready, assigned to an
array.
Flashing green
Solid green
Hot spare ready, assigned to
an array.
Flashing green
Solid amber
Drive error—Fault, not
assigned to an array.
Flashing amber
Solid amber
Drive error—Fault, assigned
to an array.
Solid amber
Solid amber
Array critical, remaining good
drive LEDs.
Solid amber
Solid amber
Hot spare, rebuild mode (all
Drive Status LEDs).
Off
N/A
Empty drive slot.
Flashing amber
Solid amber
Drive manually disabled
(applies to LVD-LVD only).
Solid green
Array is fault-tolerant.
Solid amber
Array is in rebuild mode.
Solid amber
Array has a failed drive.
Alternating
amber and
green
Firmware checksum error.
DuraStor IUG.book Page 6 Wednesday, January 30, 2002 10:49 AM
