Chapter 2: Using the Command Line Utility
●
18
ARCCONF Commands
Perform the following functions from the command line:
Note:
In the online command syntax, <> indicates a required parameter and [] indicates an
optional parameter.
arcconf atapassword
Sets or clears the Secure Erase password for SATA drives. See
arcconf setvmcredential
on page 36
for more information about Secure Erase.
Syntax
ARCCONF ATAPASSWORD <Controller#> SET <new password> <Channel# ID#> ...
ARCCONF ATAPASSWORD <Controller#> CLEAR <current password> <Channel# ID#> ...
Parameters
new password|current password is the case-senstive password string.
Channel/ID lists the space-delimited channel number and device number (ID) pairs for each
drive on which to set or clear the password.
Examples
ARCCONF ATAPASSWORD 1 SET uR8ryx 0 1
ARCCONF ATAPASSWORD 1 CLEAR uR8ryx 0 1
arcconf copyback
Enables or disables the copyback feature, which attempts to keep drives in the original slot
order after rebuilds.
Syntax
ARCCONF COPYBACK <Controller#> <ON|OFF>
Parameters
Controller# is the controller number
On enables the copyback feature
ARCCONF COMMANDS
atapassword
getsmartstats
resetstatisticscounters
setncq
copyback
getstatus
romupdate
setperform
create
getversion
saveconfig
setpower
datascrub
identify
savesupportarchive
setpriority
delete
imageupdate
setalarm
setstate
driverupdate
key
setcache
setstatsdatacollection
failover
modify
setconfig
setvmcredential
getconfig
playconfig
setmaxcache
task
getlogs
rescan
setname