Adaptec AAA-130U2 SERIES, Руководство по оборудованию, Страница: 74 / 82

C-2
AAA-130U2 Series Installation and Hardware Guide
The aspi8u2.sys (or aspi8dos.sys ) and aspicd.sys files must be cop-
ied from the \dos directory on the Adaptec Array1000U2 Family
Manager Set driver disk to a directory (e.g., c:\scsi ) on your hard
disk. The mscdex . exe file is included with MS-DOS 6.x and above
(see your MS-DOS documentation for details).
Note:
If you use MS-DOS 5 and do not have mscdex.exe , we
recommend that you upgrade to MS-DOS 6 or above. You
can also obtain
mscdex.exe from Microsoft’s Web site,
online bulletin board, or the CompuServe forum.
To complete the driver installation, edit the config.sys file to include
command lines for aspi8u2.sys and aspicd.sys , and edit the
autoexec.bat file to include a command line for mscdex.exe . The fol-
lowing examples illustrate the command line format and the com-
mand options appropriate for most systems:
■
Sample command lines for config.sys file:
device=c:\scsi\aspi8u2.sys /d
device=c:\scsi\aspicd.sys /d:aspicd0
Note:
For non-Ultra2 systems, use aspi8dos.sys
instead of aspi8u2.sys in the command line
(for example, device=c:\scsi\aspi8dos.sys /d).
■
Sample command line for autoexec.bat file:
c:\dos\mscdex.exe /d:aspicd0
(This assigns the CD-ROM the next available drive letter, typi-
cally D if there is only one DOS drive.)
The following tables describe the aspi8u2.sys (or aspi8dos.sys ) and
aspicd.sys command line options. For a description of mscdex com-
mand line options, see your Microsoft DOS documentation. You can
type command line options in uppercase or lowercase letters. Leave
a blank space between options.