Adaptec AAA-130U2 SERIES, Руководство по оборудованию, Страница: 35 / 82

3-1
ê
▼ ▼ ▼ ▼
Creating an Array With the
ARRAYCONFIG U2 Utility
In this Chapter
This chapter explains how to use the ARRAYCONFIG U2 Utility to
create a bootable or non-bootable array on your system. If you want
a bootable array on your system, you must use the ARRAYCONFIG
U2
utility to create the bootable array.
Note:
ARRAYCONFIG U2 runs from a self-booting diskette.
If you are changing the configuration of a system that is
already in use on a network, log all users off the system and
shut it down in an orderly manner before you start
ARRAYCONFIG U2
.
Once the array is created, use Adaptec CI/O Management Software,
which is included with the AAA-131U2/133U2, to create additional
arrays (CI/O is required for array management in order to provide
the proper level of fault tolerance and event notification). Refer to
the Adaptec CI/O Management Software User’s Guide for instructions
on installing and using the software.
➤
Creating an Array
3-2
➤
Making the Array Bootable 3-8