Adaptec AAA-130U2 SERIES, Руководство по оборудованию, Страница: 18 / 82

2-4
AAA-130U2 Series Installation and Hardware Guide
Installing the AAA-131U2/133U2
Follow these steps to install the AAA-131U2/133U2:
Note:
If you are installing the AAA-131U2/133U2 in an
existing system, back up all data before continuing with
installation.
1
Turn
OFF
power to the computer and disconnect the power
cord.
2
Remove the cover from the computer case.
3
Locate an unused, unobstructed, PCI expansion slot and
remove the expansion slot cover. (The expansion slot must be
Rev. 2.1 or higher compliant and support bus mastering.) Save
the slot cover screw for use in Step 4.
4
Insert the AAA-131U2/133U2 in the PCI expansion slot; press
down firmly until it clicks into place, then replace the slot
cover screw. (Figure 2-4 shows the installation of an
AAA-131U2 card.)
AAA-131U2 Card Installed in
PCI Expansion Slot
Figure 2-4. Installing an AAA-131U2 in PCI Expansion Slot