B-5
Troubleshooting
ErrorControl: REG_DWORD: 0x1
ImagePath: REG_EXPAND_SZ: Absolute Path of
“iomrpccm.exe”
ObjectName: REG_SZ : LocalSystem
Start: REG_DWORD : 0x02
Type: REG_DWORD : 0x10
–
The correct entries for
HKEY_LOCAL_MACHINE\
SYSTEM\CurrentControlSet\Services\
CIOArrayManager RPC Event
are:
DependOnService: REG_MULTI_SZ: CIOArrayManage-
ment CIOArrayManager RPC Command
DisplayName:REG_SZ: CIOArrayManager RPC Event
ErrorControl: REG_DWORD: 0x1
ImagePath: REG_EXPAND_SZ: Absolute Path of
“iomrpcev.exe”
ObjectName: REG_SZ : LocalSystem
Start: REG_DWORD : 0x02
Type: REG_DWORD : 0x10
Problems Running SNMP Agent on Your Windows NT
Server
If you have problems running SNMP agent, try the following:
■
Make sure you configure Windows NT base SNMP support,
including the appropriate trap community name and trap des-
tinations. The SNMP configuration is accessed via Control
Panel/Network/SNMP Service. If the SNMP service does not
appear as a configurable item, then SNMP support must be
installed from the Windows NT distribution media.
■
Verify that the values in the Registry match the values listed
below:
–
Make sure
HKEY_LOCAL_MACHINE\SYSTEM\Current-
ControlSet\Services\SNMP\Parameter\ExtensionAgents
includes an entry like this:
3 REG_SZ SOFTWARE\Adaptec\CIOSNMP\
CurrentVersion
(where 3 should be replaced by the next unused number)
