A-7
Configuring the AAA-13xSA RAID Card with SCSISelect
■
Include in BIOS Scan
—This option determines whether the
AAA-13xSA RAID card BIOS controls hard disk drives con-
nected to the RAID card. When set to Yes, the BIOS controls the
hard disk drive. When set to No, the BIOS does not control the
hard disk drive, and device driver software is needed to con-
trol the device. The default setting is Yes. You should leave the
setting at the default for all drives that are part of an array.
Additional Options
Array1000SA BIOS
This option determines whether the AAA-13xSA RAID card BIOS is
installed at boot time. When set to Enabled, the AAA-13xSA RAID
card BIOS is installed, and all Int13 devices are supported. When set
to Disabled, the AAA-13xSA RAID card BIOS is not installed. The
default setting is Enabled.
BIOS Support for Bootable CD-ROM
This option determines whether the AAA-13xSA RAID card BIOS
supports booting from a CD-ROM drive. When set to Enabled, the
AAA-13xSA RAID card BIOS allows booting from a CD-ROM drive.
❒