5-10
AAA-130SA Series Installation and Hardware Guide
4
From the NWSETUP Installation menu, select Default
Installation
or Custom Installation (press F1 for help).
Note:
When installing Adaptec CI/O Management
Software on an array 2 GBytes or larger, the install
program erroneously reports the following message
“
Low Disk Space–Installation May Not Complete–
Press Escape to Continue
.” Ignore this message and
continue with installation.
5
At the end of the installation process, select Yes when you are
prompted to update the
autoexec.ncf
file. (This adds the
appropriate NLM command lines to the file so that all software
is automatically loaded when the server starts.)
See the Adaptec CI/O Management Software User’s Guide for informa-
tion on using the Adaptec CI/O Management Software to add,
delete, or manage your arrays from your server console.
Adaptec CI/O Management Software Installation Hints
■
For communications supported over TCP/IP, the
tcpip.nlm
must be loaded and the IP protocol must be bound to a valid IP
address. The IP protocol generally needs to be bound to an
ethernet frame type, ETHERNET_II, which must be specified
when loading the LAN driver. A LAN driver can be loaded
multiple times for different ethernet frame types.
■
Command lines similar to the following are automatically
added to the
autoexec.ncf
file when you run the
nwsetup
utility:
#
# NWSETUP LAST UPDATE XX-XX-XX
#
RPCSTART
IOMGR.NCF
IOMGRRPC.NCF
❒
