5-6
AAA-130SA Series Installation and Hardware Guide
Installing the Driver When NetWare is Already Installed
To update or install the
cda1000.dsk
driver if NetWare is already
installed, follow the instructions in this section. The procedures are
similar for all versions of NetWare. Procedures that are specific to a
NetWare version are noted when necessary.
1
Copy the
cda1000.dsk
and
aspitran.dsk
files from the Adaptec
Array1000SA Family Manager Set driver diskette into the
server’s startup directory (e.g.,
c:\nwserver, c:\server.312
) on
your hard disk drive.
Note:
For NetWare 3.12, the
cda1000.dsk
and
aspitran.dsk
files are located in the
\netware\v3_1x
subdirectory on the diskette; for NetWare 4.11, the files
are in
\netware\v4_xx
.
2
If necessary, modify the
load
command line in the
startup.ncf
so that the proper path to the driver is specified. The correct
syntax to load the
cda1000.dsk
driver is
load [
pathname
]cda1000
Note:
If you unload
cda1000.dsk
driver, you must also
unload
cioams.nlm
. When you load
cda1000.dsk
driver
again, you must also load
cioams.nlm
. If
cioams.nlm
is not
unloaded when you unload
cda1000.dsk
, your system may
work erratically.
