2-2
Ultra160 Family Manager Set User’s Guide
Installing the Driver When Installing Windows NT
The
adpu160m.sys
driver is not embedded on the Windows NT 4.0
installation disks (or CD-ROM) and must be added during Windows
NT installation.
Completing a Fresh Windows NT 4.0 Installation From
Floppy Disk
1
Start your system with the Windows NT Boot Disk in the
floppy disk drive.
2
When prompted, insert disk #2 in your floppy disk drive. After
a few moments you will see a blue screen. To setup Windows
NT now, press Enter.
3
Press S to skip auto-detection of your SCSI host adapter.
4
Press S again to specify an additional device.
5
Press Enter to select Others; insert the Ultra160 Family
Manager Set disk for Windows in your floppy disk drive.
6
Using the arrow keys, select the following driver and press
Enter
:
Adaptec Ultra160 Family PCI SCSI Controller (NT4.0)
7
To add other host adapters that are not part of the Ultra160
Family, press S and repeat from Step 5 for each additional
adapter and insert the appropriate driver disk. The Adaptec
Ultra160 Family host adapters use the same driver; it is not
necessary to install the driver again.
8
Press Enter to continue with the Windows NT operating
system setup. Follow the instructions on-screen and in the
Windows NT documentation to complete the installation.
